|
Home · All Classes · Main Classes · Grouped Classes · Modules · Functions | |
The QFontMetricsF class provides font metrics information. More...
#include <QFontMetricsF>
The QFontMetricsF class provides font metrics information.
QFontMetricsF functions calculate the size of characters and strings for a given font. There are three ways you can create a QFontMetricsF object:
(Note: If you use a printer font the values returned may be inaccurate. Printer fonts are not always accessible so the nearest screen font is used if a printer font is supplied.)
Once created, the object provides functions to access the individual metrics of the font, its characters, and for strings rendered in the font.
There are several functions that operate on the font: ascent(), descent(), height(), leading() and lineSpacing() return the basic size properties of the font. The underlinePos(), overlinePos(), strikeOutPos() and lineWidth() functions, return the properties of the line that underlines, overlines or strikes out the characters. These functions are all fast.
There are also some functions that operate on the set of glyphs in the font: minLeftBearing(), minRightBearing() and maxWidth(). These are by necessity slow, and we recommend avoiding them if possible.
For each character, you can get its width(), leftBearing() and rightBearing() and find out whether it is in the font using inFont(). You can also treat the character as a string, and use the string functions on it.
The string functions include width(), to return the width of a string in pixels (or points, for a printer), boundingRect(), to return a rectangle large enough to contain the rendered string, and size(), to return the size of that rectangle.
Example:
QFont font("times", 24);
QFontMetricsF fm(font);
int pixelsWide = fm.width("What's the width of this text?");
int pixelsHigh = fm.height();
See also QFont, QFontInfo, and QFontDatabase.
Constructs a font metrics object for font.
The font metrics will be compatible with the paintdevice used to create font.
The font metrics object holds the information for the font that is passed in the constructor at the time it is created, and is not updated if the font's attributes are changed later.
Use QFontMetricsF(const QFont &, QPaintDevice *) to get the font metrics that are compatible with a certain paint device.
Constructs a font metrics object for font and paintdevice.
The font metrics will be compatible with the paintdevice passed. If the paintdevice is 0, the metrics will be screen-compatible, ie. the metrics you get if you use the font for drawing text on a widgets or pixmaps, not on a QPicture or QPrinter.
The font metrics object holds the information for the font that is passed in the constructor at the time it is created, and is not updated if the font's attributes are changed later.
Constructs a font metrics object with floating point precision from the given fontMetrics object.
Constructs a copy of fm.
Destroys the font metrics object and frees all allocated resources.
Returns the ascent of the font.
The ascent of a font is the distance from the baseline to the highest position characters extend to. In practice, some font designers break this rule, e.g. when they put more than one accent on top of a character, or to accommodate an unusual character in an exotic language, so it is possible (though rare) that this value will be too small.
See also descent().
Returns the bounding rectangle of the characters in the given text. This is the set of pixels the text would cover if drawn at (0, 0).
Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the text output may cover all pixels in the bounding rectangle.
Newline characters are processed as normal characters, not as line breaks.
Due to the different actual character heights, the height of the bounding rectangle of e.g. "Yes" and "yes" may be different.
See also width() and QPainter::boundingRect().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns the bounding rectangle of the character ch relative to the left-most point on the base line.
Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts, and that the text output may cover all pixels in the bounding rectangle.
Note that the rectangle usually extends both above and below the base line.
See also width().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns the bounding rectangle of the characters in the given text. This is the set of pixels the text would cover if drawn when constrained to the bounding rectangle specified by rect.
The flags argument is the bitwise OR of the following flags:
Qt::Horizontal alignment defaults to Qt::AlignLeft and vertical alignment defaults to Qt::AlignTop.
If several of the horizontal or several of the vertical alignment flags are set, the resulting alignment is undefined.
These flags are defined in Qt::AlignmentFlag.
If Qt::TextExpandTabs is set in flags, the following behavior is used to interpret tab characters in the text:
Note that the bounding rectangle may extend to the left of (0, 0), e.g. for italicized fonts.
Newline characters are processed as line breaks.
Despite the different actual character heights, the heights of the bounding rectangles of "Yes" and "yes" are the same.
The bounding rectangle returned by this function is somewhat larger than that calculated by the simpler boundingRect() function. This function uses the maximum left and right font bearings as is necessary for multi-line text to align correctly. Also, fontHeight() and lineSpacing() are used to calculate the height, rather than individual character heights.
See also width(), QPainter::boundingRect(), and Qt::Alignment.
Returns the descent of the font.
The descent is the distance from the base line to the lowest point characters extend to. (Note that this is different from X, which adds 1 pixel.) In practice, some font designers break this rule, e.g. to accommodate an unusual character in an exotic language, so it is possible (though rare) that this value will be too small.
See also ascent().
Returns the height of the font.
This is always equal to ascent()+descent()+1 (the 1 is for the base line).
See also leading() and lineSpacing().
Returns true if character ch is a valid character in the font; otherwise returns false.
Returns the leading of the font.
This is the natural inter-line spacing.
See also height() and lineSpacing().
Returns the left bearing of character ch in the font.
The left bearing is the right-ward distance of the left-most pixel of the character from the logical origin of the character. This value is negative if the pixels of the character extend to the left of the logical origin.
See width(QChar) for a graphical description of this metric.
See also rightBearing(), minLeftBearing(), and width().
Returns the distance from one base line to the next.
This value is always equal to leading()+height().
See also height() and leading().
Returns the width of the underline and strikeout lines, adjusted for the point size of the font.
See also underlinePos(), overlinePos(), and strikeOutPos().
Returns the width of the widest character in the font.
Returns the minimum left bearing of the font.
This is the smallest leftBearing(char) of all characters in the font.
Note that this function can be very slow if the font is large.
See also minRightBearing() and leftBearing().
Returns the minimum right bearing of the font.
This is the smallest rightBearing(char) of all characters in the font.
Note that this function can be very slow if the font is large.
See also minLeftBearing() and rightBearing().
Returns the distance from the base line to where an overline should be drawn.
See also underlinePos(), strikeOutPos(), and lineWidth().
Returns the right bearing of character ch in the font.
The right bearing is the left-ward distance of the right-most pixel of the character from the logical origin of a subsequent character. This value is negative if the pixels of the character extend to the right of the width() of the character.
See width() for a graphical description of this metric.
See also leftBearing(), minRightBearing(), and width().
Returns the size in pixels of the characters in the given text.
The flags argument is the bitwise OR of the following flags:
These flags are defined in Qt::TextFlags.
If Qt::TextExpandTabs is set in flags, the following behavior is used to interpret tab characters in the text:
Newline characters are processed as line breaks.
Note: Despite the different actual character heights, the heights of the bounding rectangles of "Yes" and "yes" are the same.
See also boundingRect().
Returns the distance from the base line to where the strikeout line should be drawn.
See also underlinePos(), overlinePos(), and lineWidth().
Returns the distance from the base line to where an underscore should be drawn.
See also overlinePos(), strikeOutPos(), and lineWidth().
Returns the width in pixels of the characters in the given text.
Note that this value is not equal to the width returned by boundingRect().width() because boundingRect() returns a rectangle describing the pixels this string will cover whereas width() returns the distance to where the next string should be drawn.
See also boundingRect().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns the logical width of character ch in pixels. This is a distance appropriate for drawing a subsequent character after ch.
Some of the metrics are described in the image to the right. The central dark rectangles cover the logical width() of each character. The outer pale rectangles cover the leftBearing() and rightBearing() of each character. Notice that the bearings of "f" in this particular font are both negative, while the bearings of "o" are both positive.
Warning: This function will produce incorrect results for Arabic characters or non-spacing marks in the middle of a string, as the glyph shaping and positioning of marks that happens when processing strings cannot be taken into account. Use charWidth() instead if you aren't looking for the width of isolated characters.
See also boundingRect().
Returns the 'x' height of the font. This is often but not always the same as the height of the character 'x'.
Returns true if the font metrics are not equal to the other font metrics; otherwise returns false.
See also operator==().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Assigns the font metrics fm to this font metrics object.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Assigns fontMetrics to this font metrics object.
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
Returns true if the font metrics are equal to the other font metrics; otherwise returns false.
Two font metrics are considered equal if they were constructed from the same QFont and the paint devices they were constructed for are considered to be compatible.
| Copyright © 2005 Trolltech | Trademarks | Qt 4.1.0 |
